Expert roof replacement in Cedar Park, TX. Licensed spray foam contractors with manufacturer-backed warranties and free inspections.
Our Cedar Park roof replacement process is thorough: strip existing roofing to deck, inspect and repair substrate, verify structural integrity, apply closed-cell SPF to engineered thickness, and finish with UV-protective coating. Every step documented. Every system warranted.
When Cedar Park, TX property owners need roof replacement, they turn to Lapolla Industries for the same reason thousands of customers nationwide do: we solve the root problem, not just the symptom. Our diagnostic approach uses infrared scanning, moisture mapping, and visual inspection to ensure the solution we recommend is the one your building actually needs.
With over two decades of spray foam experience, our Cedar Park crews have seen every roof replacement scenario Texas weather can create. We use that experience to select the right foam type, coating system, and application method for your specific property — delivering roof replacement results that hold up to Cedar Park conditions year after year.
From inspection to completion, here is how we deliver professional roof replacement results.
Our assessment process goes beyond a visual check. We examine substrate conditions, drainage patterns, existing insulation performance, and structural integrity. This data-driven approach ensures we recommend the right spray foam solution for your specific property.
Proper surface preparation is critical for spray foam adhesion and long-term performance. Our crews clean, dry, and prime all surfaces, remove debris and loose material, and ensure the substrate meets manufacturer specifications before any foam is applied.
Application is performed by certified spray foam technicians using the latest proportioning equipment. We monitor foam temperature, pressure, and ratio throughout application to ensure every square foot meets manufacturer performance specifications.
The final step is applying a protective topcoat that shields the SPF from UV exposure and provides the weather surface. We select the coating type based on your roof slope, ponding conditions, and desired service life. After coating, we clean up completely and review the finished project with you.
Expert answers to frequently asked roof replacement questions.
Costs for roof replacement in Cedar Park vary based on project size, existing conditions, and material requirements. We provide free on-site estimates with detailed written proposals. Contact us at {phone} for a no-obligation quote.
Absolutely. Once cured, spray polyurethane foam is inert and non-toxic. Our Cedar Park crews follow all OSHA safety protocols during application, including full PPE and ventilation procedures. The foam cures within minutes and is safe immediately after.
Yes. Spray foam can be applied year-round in Cedar Park as long as surface temperatures are above 40 degrees Fahrenheit. Our crews monitor substrate temperature and ambient conditions to ensure proper foam curing and adhesion regardless of season.
Most residential roof replacement projects in Cedar Park are completed within 1 to 3 days. Larger commercial projects may take longer depending on square footage and complexity. We provide a detailed timeline with every estimate.
Our reputation is built on results. Here is what our customers have to say.
"Full roof replacement on our 12,000 square foot commercial building. Lapolla Industries removed the old single-ply membrane and installed spray foam with a silicone topcoat. Clean work, professional crew, and a 20-year warranty."
"We manage a 40,000 square foot retail center and the roof was near end of life. Instead of tearing it off they restored it with a spray foam and coating system. Saved us over sixty percent versus replacement and added twenty years of life."
"Our flat roof on a strip mall had been leaking for months. Two other companies just slapped tar on it. These guys actually found the real problem — failed flashing at a parapet wall — and fixed it permanently."